the password for the lock channels. (How to set the lock
channel please refer to LOCK) Here will show you how
to setting and how to revising the password.
1 In "Parental Lock" function, press [OK] key, there
will pop an dialogue for you to input the password.
The default password is "0000". When you input
the correct password, you will see a screen like
below:
2 Menu Lock determining that when user wish to
enter "Installation" menu, whether have to input
Password or not. If the setting of "Menu Lock" is
"Yes" which means user have to key in password,
set "No" means unlock.
3 Channel Lock determining that when user wish to
play the lock channels, whether have to input the
password or not. If the setting is "Yes", play the
channels with lock mark will show up a dialogue
on the screen and ask for the password. If the
setting of "Channel Lock "is "No", the Lock
function will invalid.
4 New Password is used for revising password; you
can input the new password in this item by using
number keys directly. After you filled in 4 digital
numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password
again. If the password is correct, the screen will
show up a message of "Change password
successfully". After finish saving and draw back to
"System Setup" menu, the revising is complete.
5 Press [Exit] key to draw back from the "Parental
Lock" menu.
Specifications subject to change without notice
3.6
Region and Time
When you enter to "Region & Time" menu, you will see
"Region" and "Time Setting" items like below:
1 Region:
When you select "Region" and press [OK] key
to enter the menu, you will see the screen like
below:
Region is used for selecting the country which
you are in. You can press [Left/Right] key to
select each mode circularly.
Press [Menu] key to exit menu.
2 Time Setting:
When you select "Time Setting" and press [OK]
key to enter the menu, you will see the screen
like below:
19
Basic Operations
M3330 User Manual
Preliminary Confidential Proprietary