Optex ORT 8820 Instrucciones De Uso página 85

Wakeup Channel: press [OK] key to enter
channel list and select channel that you
want to setting.
Wakeup Date: use number keys to input
your wakeup date.
Wakeup Time: use number keys to input
your wakeup time. Once the time's up, no
matter what the system is in standby mode
or in playing mode, the system will
automatically switch to the channel you
want and start to play.
Duration: After you set a time for "Duration"
item, once the time's up, the system will
automatically switch to standby mode.
When you select "Message" (reminding
message) option in "Timer Service", the screen
will display like below:
Wakeup Message: press [Left/Right] key to
select reminding message as Birthday,
Anniversary and General.
Wakeup Date, you can use number key to
input your wakeup date.
Wakeup Time: use number keys to input
your wakeup time. Once the time's up, no
matter what the system is in standby mode
or in playing mode, the system will
automatically pop a reminding message.
The message will always display on the
screen, you can press [Exit] key to close it.
Press [Exit] key to draw back from
"Program Timer" menu.
Specifications subject to change without notice
2 Sleep Timer
When you enter "Sleep Timer", you will see the
window like below:
Press [Left/Right] key to switch the Sleep Time
parameter. The option is like below: Off /10min
/30min /60min /90min /120min
Sleep Timer can set the system enter standby
mode automatically after the user setting time.
Press [Exit] can exit the current menu.
3 Load Default Timer Setting
When you enter "Load Default Timer Setting", you will
see the window like below:
Press [OK] key on "Load Default Timer
Setting", it will show "Inpute Password"
dialogue.
After you input the correct password, there
will show a warning message to inquiry you
"All Timers will be cleared, continue?"
If you select "Yes", it will clear all the timer.
You can press [Exit] key to exit.
21
Preliminary Confidential Proprietary
Basic Operations
M3330 User Manual