System Setting; Connecting Your Feurich Basic To External Audio Equipment - FEURICH BASIC Manual Del Usuario

System Setting

Press both [FUNC.]+ [SOUND] buttons together to show system setting screen from the
Home Mode
• Press [FUNC.] button to select one menu from the list bellow.
• Press either [▼] or [▲] button to change the value
• Press [SOUND] button to save and return to Home Mode.
_ 1 . Control Unit Firmware Version Check
. Main Unit Firmware Version Check
_ 2
_ 3 . Start-up Volume: Adjust the default sound when the power is turned on.
(Range: 0~100/Default:60)
. Start-up volume: Set the default volume when the power is turned on (Default:60, Range:0~100)
_ 4
_ 5 . Line-out Gain: (Range: 0dB~-79dB, Default=0dB).
_ 6 . System initialization: Reset the system and memory to the original version from the
manufacturers.
_ 7 . Keyboard mode: UP → Upright, GP → Grand
_ 8 . Keyboard mode2: Note off when playing trills. (Default= OFF)
. Midi output channel: 1~16, Default: 1
_ 9

Connecting your FEURICH BASIC to external Audio Equipment

How to connect your FEURICH BASIC system with external AUDIO equipment.
To get amplified sound of the FEURICH BASIC, connect the audio cable from the AU-
DIO OUT of the FEURICH BASIC main unit to the AUX In of the audio equipment,
In order to hear the sound of external Audio Player, connect the audio cable from the
AUX Out of the Audio device to the Audio In of the FEURICH BASIC main unit.