How To Use The Functions By The Keys; Velocity Curve - FEURICH BASIC Manual Del Usuario

How to use the functions by the keys.

The FEURICH BASIC internally contains 128 GM sounds along with the pre-set and user-set ,
sounds. They all can be selected by using piano keys like the numeric keypad from 0 to 9 with the
[FUNC.] button.
A. How to selet 128 GM sounds
1) Press and hold the [FUNC.] button on the front panel.
2) Strike one, two or three black keys to select the desired sound number.
3) Release the [FUNC.] button.
Ex) Selecting 106 sound
Strike C#1 of "1", A#0 of "0", C#2 of "6" while [FUNC.] button pressed, and release [FUNC.] button
after setting.
B. Velocity Curve
The touch of your FEURICH BASIC can be changed to accom-
modate players with a lighter or heavier than average touch.
To change form the default Medium setting, follow these steps:
1) Press and hold the [FUNC.] button.
2) Press one of the 5 black keys just below the middle C to
select the new touch.
C. Transpose
Transpose by the Semitone
1) Press and hold the [FUNC.] button
2) Strike the D#4(43) black key to transpose up as desired or C#4(41) black key to transpose
down by a semitone.
3) Control range of the transpose is 24 Semitone by the semitone.
P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17
Key

Velocity curve

Touch & Sound
29 : C#3 Velocity 1 Heavy
31 : D#3 Velocity 2 Medium Heavy
34 : F#3 Velocity 3 Medium
36 : G#3 Velocity 4 Medium Light
38 : A#3 Velocity 5 Light
Transpose by the Octave
1) Press and hold the [FUNC.] button
2) Strike the G#4(48) black key to transpose up by an
octave or Strike the F#4(46) black key to transpose
down by an octave or;
3) Strike the A#4(50) black key to reset the transpose
quickly.
4) Control range of the transpose is 2 octaves.
D. Reverb, Chorus (Effects)
To simulate the spatial sound effects for the current
selected sound, a player can select the desired chorus
and reverb type and adjust the depth of each effect.
Reverb Amount (Depth)
1) Press and hold the [FUNC.] button
2) Strike the D#5(55) black key to increase reverb
amount or Strike the C#5(53) black key to de-
crease reverb amount by 1.
Chorus Amount (Depth)
1) Press and hold the [FUNC.] button
2) Strike the G#5(60) black key to increase the chorus amount or Strike the F#5(58) black key
to decrease the chorus amount by 1.
Reverb type
While pressing and holding the [FUNC.] button, strike the C#6(65) black key. This will cycle
through the reverb type and allow you to adjust the depth of each type.
Chorus type
While pressing and holding the [FUNC.] button, strike the D#6(67) black key. This will cycle
through the chorus type and allow you to adjust the depth of each type.
Key Control Range Function
41 : C#4 ± 24 Semitone Down
43 : D#4 ± 24 Semitone Up
46 : F#4 ± 2 Octave Down
48 : G#4 ± 2 Octave Up
50 : A#4 0 Reset
Key Range Function
53 : C#5 000 Reverb Down
55 : D#5 127 Reverb Up
58 : F#5 000 Chorus Down
60 : G#5 127 Chorus Up
65 : C#6 8 Reverb Type
67 : D#6 8 Chorus Type