Installation - Dimplex CONNEX CST-240 Manual De Instrucciones

CAUTION: Read all instructions and warnings carefully before starting
installation. Failure to follow these instructions may result in a possible electric
shock or fire hazard and will void the warranty.
WARNING: The installation of the thermostat must comply with the
applicable Local and/or National Electrical Codes and utility requirements.
Entrust the installation to duly qualified personnel where required by law.
WARNING: Make sure all wiring connections to the thermostat are
correct and tight to prevent electrical shorts. Use the appropriate wire to meet
local and national electrical codes for rated power consumption.
i
nstallation
Select a location that is:
• 1.5m (5ft) above the floor level
• on a section of wall without air ducts or pipes
• in an area with good airflow to best sense the average room
temperature
Avoid a location that is:
• close to a window or other external opening
• directly exposed to a source of heat, such as sunlight or
heater exhaust
CST-240 7 www.dimplex.com