Connecting The 1046 To Your System; Operating Controls; Front Panel - dbx 1046 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting the 1046 to your system

To connect the 1046 to your system, refer to the following steps:
• Turn off all equipment before making any connections.
• Mount the 1046 in a rack
Install the 1046 in a rack with the rack screws provided. It can be mounted above or below
anything that does not generate excessive heat. Ambient temperatures should not exceed
113˚ F (45˚ C) when equipment is in use. Although the unit is shielded against radio frequency
and electromagnetic interference, extremely high fields of RF and EMI should be avoided.
• Make audio connections via XLR, 1/4" TRS, or 1/4" TS plugs.
Both types of connectors for the inputs and outputs can be used for balanced or unbalanced
connections. The use of more than one connector at a time for the input/output pair could
unbalance balanced lines, cause phase cancellations, short a conductor to ground, or cause
damage to other equipment connected to the 1046.
• Apply power to the 1046
Connect the AC power cord to the AC power receptacle on the back of the unit. Route the AC
power cord to a convenient power outlet away from audio lines. The unit may be turned on and
off via the rear panel power switch or from a master equipment power switch.

Operating Controls

Front Panel

Gain Reduction Meter - This 8 stage meter shows the amount of gain reduction due to both
-20
-30
PROFESSIONAL PRODUCTS
-40
THRESHOLD
compression and/or Intelligent Predictive Limiting™, displaying gain reduction from 0 to 30 dB.
Compressor Threshold Control - This control sets the level above which compression occurs, and has
a 60 dB range.
OverEasy® Switch - OverEasy® provides a smooth transition from the compressor's linear region to
GAIN REDUCTION dB
30
25
20
15
10
6
3
1
CHANNEL ONE
3:1
-10
0
2:1
+10
1.5:1
OverEasy
+20
1:1
dBu
RATIO
COMPRESSOR
INPUT / OUTPUT LEVEL dBu
-24
-18
-12
-6
0
+6
+12 +18
0
4:1
-10
+10
+6
8:1
I/O Meter
Bypass
-20
:1
+20
dB
OUTPUT GAIN
Connecting the 1046 to your system
THRESHOLD
+
30
25
+12
-10
-20
+10
+14
+20
-30
Stereo
Couple
+4
-40
OFF
dBu
dBu
PeakStopPlus
THRESHOLD
LIMITER
®
GAIN REDUCTIO
20
15
10
CHANNEL
0
+10
1.5
OverEasy
+20
3

Publicidad

Tabla de contenido
loading

Tabla de contenido