Getting Started; Turning The Unit On; Select The Tv Input Source; Select The Dvd978 Source Mode - Coby DVD978 Manual De La Instrucción

Getting Started

Turning the Unit On

1. Press to turn the player on.
2. Press to turn the player off and place it in standby.
Unplug the system from power to turn it off completely.

Select the TV Input Source

1. Press <V-MODE> on the remote to set the video mode that cor-
responds to the video connection used (e.g., HDMI or Composite
video). See the Connections section for details.
2. Set your TV to display the input that the DVD978 is connected to
(e.g., HDMI, AV1, Composite, etc.) The Coby logo will be displayed on
the TV screen when the proper input has been selected.
TVs usually have a button labeled "Source" or "Input" that will
change its input source when pressed. To learn how to change
the input source of your TV, refer to its instruction manual.

Select the DVD978 Source Mode

For more information about each of the source modes, please refer to
their respective sections in this manual.
 Press <SOURCE> on the remote to switch between DVD-VIDEO,
TUNER, and LINE modes.
— Select DVD-VIDEO mode to play optical discs from the disc tray
(e.g., DVD, CD).
— Select TUNER to enjoy FM radio broadcasts.
www.cobyusa.com Page 25