Freezer – Fridge Key [H]
The appliance may be operated as a
Freezer or Refrigerator. Press and hold the
Freezer – Fridge key for three seconds to
convert from one operation mode to the
other. A blue dot will illuminate next to
either Freezer or Fridge to indicate the
mode.
Quick Freeze Key [F]
When in freezer operation mode, press and
quickly release the Quick Freeze key to set
the temperature to the maximum freezing
point of 11°F (24°C). The Quick Freeze icon
will illuminate, and the freezer will operate
for three hours at maximum coldness before
it automatically returns to the previously set
temperature. If the freezer is unable to
achieve maximum coldenss within 24 hours,
it will also automatically return to the
previous setting.
Temp Decrease [C] and Increase [D] Keys
Press the temperature decrease and
increase keys to lower or raise the
appliance interior temperature. The
numerical reading in the display will lower
or raise by single digit increments as the
key is pressed.
Fahrenheit – Centigrade conversion
Press and hold the Temp Decrease [C] and
Increase [D] keys at the same time for 3
seconds. You will hear a chime and the
displayed temperature reading will change
from one system of notation to the other.
Notes:
•
The temperature default setting for
Freezer mode is 0°F (-18°C), and for
Refrigerator mode 41°F (5°C).
•
The adjustment range for the Freezer is
from 10°F (-12°C) to -11°F (-24°C).
•
The adjustment range for the Refrigerator
is from 46°F (8°C) to 35°F (2°C).
Door Open Indicator [B]
When the door is open the indicator
illuminates. If the door is open for more
than 5 minutes, the indicator will blink
and a chime will sound to alert you to
close the door.
High Temp Alert Indicator [A]
Refrigerator mode: Indicator will blink and
chime will sound if interior temperature
exceeds 59°F (15°C) for 36 hours. When
temperature drops below
alert shuts off.
Freezer mode: Indicator will blink and
chime will sound if interior temperature
exceeds 18°F (-8°C) for 36 hours. When
temperature drops below
alert shuts off.
Fault codes
If one of the following fault codes appears
in the display, call 1-844-553-6667 to
schedule repair service.
Code
Description
E2
Interior temp sensor failure
E5
Defrost sensor failure
E6
Communication error
E7
Ambient temp sensor failure
Automatic Defrost
The appliance is equipped with automatic
defrost capability so that you do not have
to manually defrost. The cooling element
of the unit is regularly heated to melt
the frost that forms on it. The resulting
water drains through a duct at the back
of the unit and into a concealed pan at
the base of the unit where it evaporates.
Should any frost form on the unit interior
walls, remove food and store it elsewhere.
Then unplug the unit, wait long enough for
the frost to melt, and wipe up the moisture
with a dry towel.
Rear Wheels
The appliance is equipped with rear
wheels to help you roll it into or out of a
location. CAUTION: Obtain the aid of an
assistant if the appliance feels too heavy
for you to safely move it.
Interior LED Lighting
The appliance features interior LED lighting,
which is more effective and longer lasting
than incandescent bulbs. However, in the
unlikely event that the LED fails to light,
call 1-844-553-6667 to schedule repair
service to replace it.
7
54°F (12°C) the
10°F (-12°C) the