General Safety Instructions - LaserLiner TX Manual Del Usuario

Read the operating instructions and the enclosed brochure „Guarantee and additional notices"
!
completely. Follow the instructions they contain. This document must be kept in a safe place
and passed on together with the device.
Function/Application
– Localises telephone wires, network cables, wires and cables in electrical systems
– Tests network cabling (assignment of individual conductors)
– Integrated continuity tester
– Comprehensive accessories set for testing the most commonly used types of plug-in connections
(RJ11, RJ45, BNC, TV coax., F adapter)
– Universal testing terminal for the connection to any conductor
– Loud audible signal for straightforward identification of selected cables
– Extremely bright white LED flashlight function

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope
of the specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– Do not use the device in environments containing explosive gases or vapour.
– Make sure that you always select the correct connections and the correct rotary switch position for
the measurement being carried out.
– The device is not suitable for measurement whilst under voltage. Therefore, always make sure the
measuring circuit is at zero voltage. Appropriate measures must be taken to ensure a zero-voltage state.
– Check that all high-voltage capacitors are discharged.
– The sender introduces the measuring voltage into the lines to be tested. This may impair or damage
sensitive electronic equipment (e.g. network cards). Therefore, please make sure that any lines to be
tested which belong to sensitive electronic equipment are isolated before measurement.
– Use only original test adapters.
Safety instructions
Using artificial, optical emission (OStrV)
– The device works with LEDs of risk group RG 0 (exempt, no risk) in
accordance with the latest versions of applicable standards relating to
photobiological safety (EN 62471:2008-09ff / IEC/TR 62471:2006-07ff).
– Radiation power: Peak wavelength equals 456 nm.
– When used for the intended purpose and under reasonably foreseeable
conditions, the accessible radiation of the LEDs is safe for the human eye
and skin.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations and limits in accordance
with the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations or in the vicinity of
people with pacemakers – may apply. There is a possibility of a dangerous impact on – or interference
with – electronic devices.
MultiCable-Checker
LED outlet
07
EN