More About Media For Your Plextor Drive; Tray Loading And Operation; Handling Dvd And Cd Media - Plextor PX-610U Manual De Instalación Y Del Usuario

Section 4. Using Your PX-610U

More About Media for Your Plextor Drive

See the Plextor web site at www.plextor.com for a list of Plextor-
approved media for your drive

Tray Loading and Operation

To load and unload the tray:
1. While the drive is powered up, push the eject button on the front
panel. The tray drawer slides out in 3–4 seconds.
Figure 5: Loading the tray
2. Lay a CD or DVD disc in the depression in the tray, label side up.
3. Push the tray manually to insert disc.

Handling DVD and CD Media

Take care when handling blank CD and DVD media. Dust, scratches,
and fingerprints on either side of the disc can cause write errors during
recording. When picking up or holding blank media you can either place
your fingers along the outer edge of the disc, or place one finger through
the center hole and one finger on the outer edge. Once you have finished
creating a disc, label it by writing on the top using permanent ink.
CAUTION: We recommend using a "non-toxic" marker, such as a
Sharpie® pen, that conforms to the ASTM D-4236 standard. Some
permanent markers will damage the media. Also, do not press too
hard when writing on the disc.