LG 47LX9500 Manual Del Propietário página 53

Magic Motion Remote Control Registration
The Magic Motion Remote Control operates by pairing with your TV.
Register the Magic Motion Remote Control after purchasing the TV.
How to use Magic Motion Remote Control
1 Press this button if there is no pointer on your TV screen. The pointer will then appear on the
screen.
ENTER
If the pointer has not been used for a certain period of time, it will disappear.
2
Precautions to Take when Using the Magic Motion Remote Control
Use the remote control within the maximum commu-
nication distance (10 m). Using the remote control
beyond this distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to nearby
devices. Electrical devices such as a microwave oven or
wireless LAN product may cause interference, as this
will use the same bandwidth (2.4 GHz) as the Magic
Motion Remote Control.
The Magic Motion Remote Control may be damaged
or may malfunction if it is dropped or receives a heavy
impact.
When playing a game using the Magic Motion Remote
Control, hold it securely by wrapping its strap around
your wrist and adjusting the length with the adjustable
ring.
Take care not to bump into nearby furniture or other
people when using the Magic Motion Remote Control.
Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
How to register the Magic Motion Remote Control
To register the Remote Control, press the ENTER button on the
ENTER
Remote Control while aiming it at your TV.
How to Re-register the Magic Motion Remote Control after
Registration Failure
Reset the remote control by pressing and holding both the
MUTE
ENTER and MUTE buttons for 5 seconds. (Once the reset is
complete, the light on the Pointer RF Receiver blinks.) Then
repeat the above procedure to register the remote control.
You can move the pointer by aiming the Pointer Receiver of the remote
control at your TV then move it left, right, up or down.
If the pointer does not work properly after clicking the ENTER button, leave
the remote control for 10 seconds then use it again.
53