The charging station's built-in charging timer unit alternates the charge hourly between two zones. The LED status interface (shown below) indicates
which zone is being charged at any given time by the LED that is illuminated. The two non-charging external convenience power outlets to the left of
the LEDs will not be active while the zones are charging.
To use the two external convenience power outlets, open the rear door. From inside, flip the switch located on the charging timer unit.
Timer-Controlled C13 Outlets
Always-On 5-15R Outlet
Note: The internal outlet located on the charging timer unit can be used to provide continuous AC power to a device, such as a wireless access point or router.