Optional Display Mount Adapter Kit; Specifications; Storage, Service And Cleaning - Tripp-Lite CSC42AC Manual Del Propietário

7. Optional Display Mount Adapter Kit

Add a television display to your charging station cart with an optional display mount adapter kit (model: CSC36DM). The adapter kit accommodates
displays up to 60 inches and includes all installation hardware. For further installation instructions, refer to the CSC36DM Installation Guide.

8. Specifications

Model
Cabinet Dimensions (H x W x D)
Unit Weight
Load Capacity
AC Receptacles
Power Requirement
Operating Temperature
Operating Humidity

9. Storage, Service and Cleaning

Storage
The enclosure should be stored in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses,
conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.
Service
The enclosure is covered by the limited warranty described in this manual. For more information, visit www.tripplite.com/support.
Cleaning
Before cleaning, always power off the charging station by unplugging it from its AC source. Dampen a clean, lint-free cloth with water and wipe down
the unit, as necessary. Allow the surface area to dry before plugging in the unit.
Note: Avoid using abrasive cloths, solvents or aerosol sprays to clean the charging station; doing so can damage the unit.
CSC42AC
43.12 x 26.04 x 27.96 in. / 1095 x 661 x 710 mm
146.28 lb. / 66.4 kg
Power Distribution Units: 48 x 5-15R (Divided into Two Zones)
External Convenience Outlets: 2 x 5-15R (Operated via the Charging Timer Unit Switch)
Internal Outlet: 1 x 5-15R (Always On)
Input: 120V AC, 50/60 Hz, 12 Amps
32° to 104° F / 0° to 40° C
5 to 95% RH, Non-Condensing
10
CSC45AC
147.50 lb. / 66.9 kg
250 lb. / 113 kg
CSC48AC
147.82 lb. / 67 kg