Custom Top Grille And Door Panels - KitchenAid KSSC48QKS00 Instrucciones De Instalación

Bottom Mount Panel Top Grille and Handle Kits
All factory parts are available through your KitchenAid dealer or
by calling KitchenAid Parts and Accessories at 1-800-442-9991.
Factory Door Panels Kits
Four kits containing colored acrylic or stainless steel door and
top grille panels are available. Follow the kit instructions for
installing the panels.
NOTE: Panel kits are not required for factory-installed stainless
steel panel models or wraparound door models.
Door Panel Part Numbers for 36 in. Panel Models
Color
White
Black
Biscuit
Stainless Steel
Top Grille Kit
72 in. (183 cm) wide Top Grille Panel Kits are available. These kits
allow 2 units (one left-hand swing and one right-hand) to be
installed side by side with a single grille.
Top Grille Kit for Panels Models
Color
White
Black
Biscuit
Stainless Steel
Top Grille Kit for Wraparound Models
Color
Black
Stainless Steel
Extended Door Handle Kits
Use extended door handles when additional finger clearance is
needed between door handles and custom panel. Follow the kit
instructions for installing the door handles.
Color Left-Hand
Swing
White #4396119
Black #4396116
Biscuit #4396117
Stainless Steel #4396118
Matte Aluminum #4396120
36 in. (91 cm)
#2220952
#2220953
#2220954
#2220955
72 in. (183 cm)
#2220927
#2220928
#2220929
#2220876
Part Number
#2220960
#2220877
Right-Hand
Swing
#8171424
#8171427
#8171426
#8171425
#8171423

Custom Top Grille and Door Panels

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinet maker or
carpenter. See dimensional drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (±) ) ¹⁄₁₆ in. (1.5 mm) tolerance.
Panels that are more than ¹⁄₄ in. (6 mm) thick must be routed. If
panels are less than ¹⁄₄ in. (6 mm) thick, install a filler panel
between doors and decorative panels.
Side by Side Custom Top Grille and Door Panels
Top Grille Panel
The top panel should not weigh more than 10 lbs. (4.5 kg).
A
Model
36 in. (91 cm)
42 in. (106 cm)
48 in. (122 cm)
Door Panels for Non-dispenser Models
The freezer panel should NOT weigh more than 30 lbs. (13.5 kg).
The refrigerator panel should NOT weigh more than 50 lbs.
(23 kg).
A
70
(179 cm)
Model A
36 in. (91 cm) 14¹⁄₄ in. (36 cm)
42 in. (106 cm) 16³⁄₄ in. (43 cm)
48 in. (122 cm) 19¹⁄₄ in. (49 cm)
7¹⁄₄"
(18.4 cm)
A
35³⁄₈ in. (90 cm)
41³⁄₈ in. (105 cm)
47³⁄₈ in. (120 cm)
B
7 / "
16
B
19¹⁄₄ in. (49 cm)
22³⁄₄ in. (58 cm)
26¹⁄₄ in. (67 cm)
9