Mitsubishi Raider 2008-2009 - Metra 95-6511 Instrucciones De Instalación

Jeep Wrangler 2011-up
(modifications to radio cavity required)
4. Remove pad in pocket on top
center of dash then remove (1)
9/32" screw underneath. Remove
dash panel from around radio and
instrument cluster. (Figure D)
5. Remove (4) 9/32" screws securing
the radio. Unplug and remove radio.
6. Remove (2) 9/32" screws securing
the metal bracket inside of the dash
cavity and remove it for depth.
(Figure E)
7. A small cut in the plastic at the top
of the radio cavity will be required
for most double DIN radios.
(See below)
Remove material from
shaded area for double
DIN radios.
Dash Disassembly
(Figure D)
(Figure E)
Mitsubishi Raider
1. Unsnap and remove center dash
panel. (Figure A)
2. Remove (4) 7mm screws securing
the radio. Unplug and remove radio.
Continue to kit assembly
13
2008-2009
(Figure A)