Unit Mount; Panel Connected Through Wi-Fi - Auta 660001 Manual Del Usuario

Ocultar thumbs Ver también para 660001:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNIT MOUNT. SURFACE MOUNT
1-
Take the surface mount bracket from the kit and situate it 150-160 cm from the floor
line.
2-
Mark and drill four holes in the wall.
3-
Take four nuts from the kit and hammer them into the drilled holes.
4-
Fix surface mount bracket on the wall by four screws from the kit.
5-
Connect all communication wires and fix the door station on the surface mount
bracket by one bolt from the bottom side.
UNIT MOUNT. ANGLE BRACKET MOUNT
1-
Take the angle bracket from the kit and situate it 150-160 cm from the floor line.
2-
Mark and drill two holes in the wall.
3-
Take two nuts from the kit and hammer them into the drilled holes.
4-
Fix the angle bracket on the wall by the screws from the kit.
5-
Connect all communication wires and fix the door station on the angle mount
bracket by one bolt from the bottom side.
5
OPERATION. PANEL CONNECTED THROUGH Wi-Fi
Open Auta FREE app,
LOGIN or REGISTER
1
(press
to get the
verification code)
Add new Wi-Fi
2
device
this screen
ONLY will appear
on devices
Manage the
3
notifications
client@auta.es
LOGIN
Forgot password?
+
New user
Auta FREE
Connect new device
Panels
Monitors
2
1
new
search
3
NEW DEVICE
CONFIRM
Network configuration
Connect new device
ENTER THE Wi-Fi PASSWORD
1
Get out from Auta FREE
app and go to settings
AUTA
2
Tap on the Wi-Fi and select the
8
network that starts by "cctvp2p",
wait until the Wi-Fi icon appears at
the top of the interface
CONFIRM
9
3
Back to Auta FREE app
and press "NEXT"
NEXT
Auta FREE
Panels
Monitors
Panel 1
NEW DEVICE
6
New user
email
Verification code
270 s
Password
Verify password
CONFIRM
Network configuration
4
Please turn on your phone Wi-Fi first, turn off your
mobile data service and VPN service.
Set the panel in AP mode (press the call button
until listen a beep and release it. Do this 3 times).
Wait to the panel reboot, every second one beep
sound and blue LED blinks.
It indicates panel is in AP mode. Press "NEXT" ...
5
NEXT
Add device
Device GID:
al10854958
Device Name:
Password:
default (888888)
10
ADD
11
IMPORTANT:
Make sure your phone/tablet is connected to
your Wi-Fi before press "ADD"
Auta FREE
NOTIFICATIONS OFF
NOTIFICATIONS ON
CUSTOM

Publicidad

Tabla de contenido
loading

Tabla de contenido