Tabla de contenido
Publicidad
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 99-8220
KIT FEATURES
• DIN radio provision with pocket
• ISO mount radio provision with pocket
• Double DIN radio provision
• Stacked ISO mount units provision
• 99-8220 - Scratch Resistant Matte Black
• 99-8220HG - High Gloss Black
• 99-8220CHG - High Gloss Charcoal
KIT COMPONENTS
• A) Radio housing • B) ISO brackets • C) Double DIN trim plate • D) Double DIN brackets
• E) ISO trim plate • F) Pocket
A
E
F
• Panel removal tool • Phillips screwdriver • Small flat blade screwdriver • Socket wrench
APPLICATIONS
Toyota 2007-up
99-8220
(matches 2010-up)
B
WIRING & ANTENNA CONNECTIONS
Wiring Harness:
• 70-1761 - Toyota harness 1987-up
• TYTO-01 - Toyota amp interface harness 2003-up
Antenna Adapter:
• Not required
TOOLS REQUIRED
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
C
metraonline.com
D
(sold separately)
Publicidad
Tabla de contenido
Manuales relacionados para Metra 99-8220
Resumen de contenidos para Metra 99-8220
- Página 1 • DIN radio provision with pocket • ISO mount radio provision with pocket • Double DIN radio provision • Stacked ISO mount units provision • 99-8220 - Scratch Resistant Matte Black • 99-8220HG - High Gloss Black • 99-8220CHG - High Gloss Charcoal (matches 2010-up) KIT COMPONENTS •...
-
Página 2: Tabla De Contenido
– Double DIN radio provision ....................8 – Stacked ISO mount units provision ...................9 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. -
Página 3: Dash Disassembly
Dash Disassembly 99-8220 Toyota Tundra 2007-up (console shift) Toyota Sequoia 2008-up (console shift) 1. Unclip and remove the top trim panel around cup holders. (Figure A) 2. Remove (1) Phillips screw from shifter trim panel and remove panel. (Figure B) 3. - Página 4 Dash Disassembly 99-8220 Toyota Tundra 2007-up (console shift) Toyota Sequoia 2008-up (console shift) 4. Remove (4) 10 mm bolts securing the radio. (Figure D) 5. Unclip the right side of the instrument panel trim and pull back the trim,then unclip,unplug and remove radio.
-
Página 5: Toyota Tundra (Column Shift) 2007-Up
Dash Disassembly 99-8220 Toyota Tundra 2007-up (column shift) Toyota Sequoia 2008-up (column shift) 1. Remove (2) plastic Phillips screws one from each side of the trim panel below the cup holder then unclip and remove the panel. (Figure A) 2. Pull the cup holder out and depress the (2) clips on each side to slide cup holder out of cup holder panel. -
Página 6: Kit Assembly
3. Snap the pocket into the radio housing. (Figure C) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or (Figure A) AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. -
Página 7: Iso Mount Radio Provision With Pocket
(Figure D) 5. Locate the factory wiring harness in the (Figure B) dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 6. Reassemble dash in reverse order of disassembly. -
Página 8: Double Din Radio Provision
(Figure C) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. -
Página 9: Stacked Iso Mount Units Provision
(Figure C) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. - Página 10 Notes...
- Página 11 Notes...
- Página 12 INSTALLATION INSTRUCTIONS FOR PART 99-8220 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...