Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Toyota Avalon 2011-2012
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted High Gloss Black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (2) Panel clips • E) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: TYTO-01
Antenna Adapter: Not required
Steering wheel control interface: ASWC-1 (sold separately)
METRA - The World's best kits
Installation instructions for part 99-8263HG
(with factory navigation)
99-8263HG
C
®
metraonline.com
®
E
D
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION

Publicidad

loading

Resumen de contenidos para Metra 99-8263HG

  • Página 1 ® Installation instructions for part 99-8263HG Toyota Avalon 2011-2012 Table of Contents (with factory navigation) Dash Disassembly ..........2 99-8263HG Kit Assembly – ISO DIN radio provision with pocket ...... 3 KIT FEATURES – ISO DDIN radio provision ........3 •...
  • Página 2 ® 99-8263HG Dash Disassembly 1. Unclip and remove the radio/ climate trim panel. (Figure A) 2. Remove (4) 10mm screws securing the radio/climate control assembly. (Figure B) 3. Remove (4) Phillips screws securing the climate control to the factory bracket assembly. (Figure C)
  • Página 3 Metra 5. Locate the factory wiring harness and recommends using the proper antenna connector in the dash and mating adapter from Metra and/or complete all necessary connections Axxess. Test the radio and climate to the radio and factory components.
  • Página 4 ® Installation instructions for part 99-8263HG IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Página 5 ® Instrucciones de instalación para la pieza 99-8263HG Toyota Avalon 2011-2012 Indice (con navegación de fábrica) Desmontaje tablero ..........2 99-8263HG Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT – Provisión de radio ISO DDIN ......... 3 •...
  • Página 6 ® 99-8263HG Desmontaje tablero 1. Desenganche y quite el panel de la radio/clima. (Figura A) 2. Quite los (4) tornillos 10mm que sujetan el ensamble del radio/ control de clima. (Figura B) 3. Quite los (4) tornillos Phillips que sujetan el control de clima al ensamble del soporte de fábrica.
  • Página 7 Localice el arnés de cableado de fábrica y el adecuados de acoplamiento de conector de la antena en el tablero y haga Metra o de AXXESS. Pruebe el radio todas las conexiones necesarias al radio y y controles de clima para verificar componentes de fábrica.
  • Página 8 ® Instrucciones de instalación para la pieza 99-8263HG IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...