1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 99-8265HG
  6. Instrucciones de instalación

Metra 99-8265HG Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Tabla de contenido

KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) Pocket • D) (4) #6 x 3/8" Phillips screws • E) (2) #8 x 3/8" Phillips screws
A
The World's best kits.
®
Toyota C-HR 2018-up
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high gloss black
B
C
MetraOnline.com
D
E
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
99-8265HG
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 4/20/22 INST99-8265HG

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 99-8265HG

Resumen de contenidos para Metra 99-8265HG

  • Página 1 With the key out of the ignition, disconnect the negative battery terminal before installing this product. Ensure that all installation connections are secure before cycling the ignition to test this product. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST99-8265HG...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY 1. Unclip and remove the trim panel from around the factory radio, including the clock. (Figure A) 2. Remove (4) 10mm bolts securing the radio, then remove it. (Figure B) Continue to Kit Assembly (Figure B) (Figure A) 386.257.1187 MetraOnline.com...

  • Página 3: Kit Assembly

    KIT ASSEMBLY 1. Attach the radio brackets to the radio 5. Locate the factory wiring harness and housing trim panel using the antenna plug in the dash and make all (4) #6 x 3/8” screws supplied. (Figure A) necessary wire connections to the radio. Metra recommends using the proper 2. Mount the pocket to the radio brackets mating adapters from Metra and/ with the (2) #8 x 3/8” Phillips screws or AXXESS. Test the radio for supplied. (Figure B) proper operation. 3. Remove the metal DIN sleeve and trim 6. Mount the new radio assembly into ring from the aftermarket radio. the dash. 4. Slide the radio into the assembly and 7. Reassemble the dash in the reverse secure with the screws supplied with (Figure A) (Figure C) order of disassembly. the radio. (Figure C) (Figure B) REV. 4/20/2022 INST99-8265HG...
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST99-8265HG...
  • Página 5 Al probar el equipo del mercado de accesorios, asegúrese de que todo el equipo de fábrica esté conectado antes de encender el llave de encendido. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST99-8265HG...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de moldura que rodea el radio de fábrica que incluye el reloj. (Figura A) 2. Quite (4) pernos de 10 MM que fijan el radio. Después, quítelo. (Figura B) Continúe con Ensamble del Kit (Figura B) (Figura A) 386.257.1187 MetraOnline.com...

  • Página 7: Ensamble Del Kit

    (4) tornillos #6 X 3/8” incluidos. realice todas las conexiones necesarias al radio. Metra recomienda el uso 2. Monte la cavidad a los soportes del de adaptadores de acoplamiento radio con los (2) tornillos Phillips adecuados de Metra o de AXXESS.
  • Página 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 4/20/22 INST99-8265HG...

Tabla de contenido