Battery Replacement - Multimetrix DL 53 Manual De Funcionamiento

** To save power, alarm LEDs for temperature and humidity can be disabled via the
supplied software.
***When both temperature and relative humidity readings exceed alarm level
synchronously, LED status indication alternate every cycle.
****When the battery is low, all operations will be disabled
automatically stops when the battery weakens (logged data will be retained). The
supplied software is required to restart logging and to download logged data.

BATTERY REPLACEMENT

We recommend that you replace the battery every 12 months, or
prior to logging critical data.
Datalogger does not lose its stored readings when the battery is
discharged or when the battery is replaced; the data logging
process will however be stopped and cannot be re-started until the
battery has been replaced and the logged data has been
downloaded to PC.
Only use 3.6V lithium batteries. Before replacing the battery,
remove the model from the PC.
NOTE:
Leaving the model plugged into the USB port for longer than
necessary will cause some of the battery capacity to be lost.
1
2
3
13
automatically. NOTE: Logging
4