Multimetrix DL 53 Manual De Funcionamiento página 9

Congratulations on your purchase of the humidity and temperature
datalogger. This datalogger module can be used to monitor
humidity and temperature of greenhouses, warehouses, food
transports, aircraft
museums, and HVAC equipment. It measures and stores up to
16,000 relative humidity and 16,000 temperature readings over 0 to
100%RH and -40 to +70° C (-40 to +158° F) measurement ranges.
user can easily set up the logging rate, high/low alarm and start-
mode, and download the stored data by plugging the module
straight into a PC's USB port and running the purpose designed
software under Windows 98, 2000, XP, or Vista. Relative humidity,
temperature and dew point (the temperature at which water vapor
present in the air begins to condense) data can then be graphed,
printed and exported to other applications. The data logger is
supplied with a long-life lithium battery, which can typically allow
logging for a year. Status indication is via flashing Red /Yellow LED
and Green LED.
Memory for 32000 readings(16000 temperature and 16000
humidity readings)
Dew point indication via Windows Software
Selectable measuring cycle: 2s, 5s, 10s, 30s, 1m, 5m, 10m,
30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr
Status Indication via Red/Yellow LED and Green LED
USB Interface for Set-up and Data Download
User-Programmable Alarm Thresholds for Relative Humidity
and Temperature
Analysis software used to view graph
INTRODUCTION
cabins,
FEATURES
refrigerated trucks,
9
containers,