Aiwa CSD-MD50 Manual De Instrucciones página 20

RECORDING ONLY ONE TRACK
OF A CD
2
T 9---)
rMULTl JOG
P
000
000
000
I
0-9,+10
000
000
Oa
@!gq---
++, >
0 L,
II
1
2
3
4
Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
Load a CD and press the CD ~ button.
Playback starts.
Select the desired track.
Use the 4+ or > button, the MULTI JOG dial, or the
numbered buttons on the remote control to play back the
desired track.
Press the CD F MD
button to start recording.
The CD returns to the beginning of the track and recording
starts.
When the track of the CD finishes playing, the recording stops
automatically, while the CD goes to the next track.
When recording stops, TOC-EDIT flashes on the display and
the contents (TOC) of the recording are recorded on the MD.
To
stop recording before the end of the track
Press the button. Recording to the MD stops, and the contents
(TOC) of the recording are recorded on the MD.
To stop play of the CD, press the button again.
PROGRAMMED RECORDING OF
A CD
Up to 20 tracks can be programmed and recorded on an MD.
1
2
3
4
5
6
7
31!5
V
DISPLAY
b'
@
.lOcl
000
000
000
I
5
000
0 L
t?
@l
0
Lm
II
Insert a recordable MD into the disc drive with
the label side up and in the direction of the arrow.
Load a CD and press the FUNCTION button on
the remote control to select CD.
In stop mode, press the MODE button repeatedly
until PROGRAM? appears on the display.
Within 5 seconds, press the ENTER button.
Turn the MULTI JOG dial to select a track to be
programmed, and press the ENTER button.
Repeat step 5 to program other tracks.
For detailed explanations on how to program the tracks, see
page 12.
Press the CD * MD button to start recording.
Recording begins.
When the programmed tracks finish playing, the recording
stops automatically.
When recording stops, TOC-EDIT flashes on the display and
the contents (TOC) of the recording are recorded on the MD.
To
stop recording halfway
Press the button. Recording to the MD stops, and the contents
(TOC) of the recording are recorded on the MD.
To stop play of the CD, press the button again.
To change the display during recording
Pressing the DISP button (or the DISPLAY button on the remote
control) changes the information shown on the lower part of the
display
as follows.
r
@ Elapsed playing time of the track being recorded
@ Remaining playback time of the current track
Q) Remaining recording time
20
ENGLISH