Getting Started - Conceptronic CTVDIGU Manual De Instrucciones

ENGLISH

Getting started

Inserting the remote control battery
To insert a battery into your remote control, do the following:
1. Use a pointed object such as a pencil to press the recessed switch on the
back of the remote control (1) and then slide the battery compartment
door in the direction of the arrow (2), while keeping the switch pressed.
2. Insert a CR2025 3V Lithium battery pack into the battery compartment with
the correct polarity as shown.
3. Slide the battery compartment door in the direction of the arrow until it
snaps back into place.
Note: When using the remote control for the first time, open the battery
compartment and remove the plastic cover around the battery before
using it.
Getting started
1
2
9