Conceptronic CTVDIGU Manual De Instrucciones página 53

ENGLISH
Adjusting audio
To adjust the volume, do any of the following:
• Turn the round volume dial on the Digital TV control panel, press the + or -
keys on the keyboard, or press the VOL S and T keys on the remote control
to change the volume.
• Press the Mute button on the Digital TV control panel or on the remote
control to disable the audio. Press it again to re-enable it.
• Press MTS on the Digital TV control panel or remote control to listen to SAP
(Secondary Audio Program) such as weather or traffic information. This
function will only work if the broadcasting company supports it.
Adjusting video
Press the Zoom button on the Digital TV control panel or the Full screen button
on the remote control to view the TV program in full screen (maximized) mode.
To adjust the various picture settings,
press the Setting button, select Setting
from the popup menu, or press F2 on the
keyboard then go to the Adjust page.
For normal TV viewing:
• Move the slider to change the
brightness.
• Select an aspect ratio to set the
desired screen size. You can
choose from User define, 4:3, 16:9,
and 2.21:1. You can also change
this by selecting Aspect Ratio from
the popup menu and selecting the
desired setting
When using the Picture-In-Picture (PIP) function, you can configure two settings:
• The main picture or the PIP picture to record.
• The degree of transparency of the PIP picture.
22