Before using your oven
•
Remove all packing and foreign materials
from the oven. Any material of this sort left
inside may melt or burn when the appliance
is used.
•
Heat the empty appliance to the maximum
temperature in order to remove any
manufacturing residues which could affect
the food with unpleasant odours.
120 V / 240 V vs. 120 V / 208 V Connection
Most oven installations will have a 120 V / 240 V
connection. If your oven is installed with 120 V / 208
V, the preheat time may be slightly longer than with
120 V / 240 V. The oven is designed to assure the
same clean time at 120 V / 208 V.
High Altitude Baking
When cooking at high altitude, recipes and cooking
time will vary from the standard.
Power Failure
After the power returns to the oven, the clock
displays the time 12.00
display will flash and the operation of the door lock
will be checked, and then the display of "AUTO
LOCK" will disappear when the check is completed.
Then set the clock.
F Failure Number Codes
If F codes are displayed when the electronic control
detects a problem in the oven or in the electronics.
(see page 35)
Squeak Noise
You may hear a sound from the unit while using
the oven due to heat warping, but this is not a
malfunction.
Flashing Symbols or Numbers
Signal an incomplete action that is in progress
(locking the door, preheat, etc.) or an incomplete
setting that calls for another input.
Beeps
Signal that more information must be entered or
confirm the receipt of an entry. Beeps also signal the
end of a function or an oven fault.
8
General Oven Information
CAUTION
. Also, the "AUTO LOCK"
AM
Convection Fan
The convection fan operates during any Convection
Mode and Dehydrate Mode. When the oven is
operating in the Convection Mode, the fan will turn
off automatically when the door is opened. The
Convection Fan always runs during the preheat time.
Component Cooling Fan
Activates during any cooking or Self-Cleaning mode
to cool inner components and outer door surfaces.
This air is exhausted through the vent located above
the oven door. It continues to run until components
have cooled sufficiently. The cooling fan operates
at double speed (or RPM's) in Self-Cleaning and
whenever the internal components temperature
becomes high.
Access Lock
To
Lock
CHILD
and
LOCK
press more than
3 seconds
USER
and
LOCK
press more than
3 seconds
Turn the both Dials to
AUTO
and
LOCK
the Self-Cleaning
•
"L LOCK" will be displayed every time you touch
any keys when the CHILD LOCK is working.
•
"AUTO LOCK" for Self-Cleaning mode flashes
when the latch is moving in order to lock or unlock
the door.
Using Oven Lights
•
Oven lights turn on and off automatically when
the door is opened and closed.
•
When the oven is in use, oven lights turn on
automatically when a mode is started. Oven lights
will turn off automatically when finish and the
oven mode is cancelled.
•
The lights do not operate in the Self-Cleaning
Mode.
•
[LIGHT]Key to activates the lights in oven.
Fahrenheit and Celsius
The temperature is preset in Fahrenheit, however it
can be changed to Celsius. (see page 26 #1)
ENGLISH
LOCK PARTS
To
Unlock
Door
Keys
✔
✔
during
✔
Dials
✔