Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
Fig. 21
CLEANING AFTER A BREW
CAUTION: Make sure that the brewer is unplugged
from the power source before cleaning.
CAUTION: Be sure to allow the brewer to cool before
cleaning.
NOTE: Do not leave coffee in the thermal carafe for an
extended period of time after a brew.
NOTE: Do not leave water in the reservoir unused for
multiple days. Rinse and replace with fresh water.
1
Before cleaning, close the Drip Stop.
2
After each brew is complete and the coffee grounds have
cooled, carefully remove the permanent filter and wash. If
using the paper filter, simply discard. Remove brew basket
from the brewer, rinse and wash with soap and warm water.
NOTE: The brew basket and thermal carafe are not
dishwasher safe.
NOTE: If coffee grounds spilled over into the brew basket or
in the overflow channels, remove and rinse under water until
grounds are removed.
3
Wash the thermal carafe and brew-through lid with soap and
warm water. Use a bottle brush or a cloth to wash the inside
of the carafe.
NOTE: The brew-through lid, permanent filter and water
reservoir are top shelf dishwasher safe.
4
Wipe machine down with a warm cloth with soap and water
to clean the base plate and outer parts. Do not immerse
the base in water.
NOTE: For best results, use a bottle brush. This will allow you
to scrub all of the inside with soap and hot water.
CLEANING YOUR CARAFE
We recommend rinsing your carafe
with warm soapy water.
If you want to clean the carafe more
thoroughly, we recommend using a soft
foam brush such as the one shown.
21
1-877-646-5288
H
M
OFF
CLEANING YOUR WATER RESERVOIR
1
Empty the water reservoir.
2
Hand wash with dish soap and rinse or place on the top rack
of your dishwasher.
HOW TO CLEAN & DESCALE THE BREWING SYSTEM
CAUTION: Be sure to allow the brewer to cool before
cleaning.
CAUTION: DO NOT immerse the coffeemaker into water
or any other liquid.
CAUTION: DO NOT place the thermal carafe in the
dishwasher.
NOTE: Cleaning and descaling shall be performed on
a weekly basis. Cleaning your Ninja Coffee Bar
recommended to keep your brewer brewing hot, rich, and
smooth coffee.
The Clean button will illuminate when your Ninja Coffee Bar
senses there is a calcium build up on your machine which
may be affecting the flavor of your coffee. To clean your
machine and keep the same great taste of Ninja
follow the directions below.
1
Select the carafe size and set the carafe in place beneath the
brew basket.
2
Use a descaling solution and follow the directions on the
package and fill up to, but not exceeding the Clean Cycle Max
Fill line (30 oz.).
Fill the water reservoir to the cup line (11 oz.) with white
vinegar, then fill the rest of the water reservoir with water up
to, but not exceeding the Clean Cycle Max Fill line (30 oz.)
IMPORTANT: Use only white vinegar.
3
Once the water reservoir is filled with your cleaning solution
and water mixture (not exceeding the Clean Cycle Max
Fill line), simply press the Clean button to activate the clean
cycle. (Fig. 21)
NOTE: The clean cycle takes approximately 8 minutes to fully
descale and clean the machine.
4
Once the clean cycle is complete, empty and rinse the carafe
and water reservoir. Please take special care to thoroughly
clean the carafe and water reservoir to remove any cleaning
solution that could affect the flavor of your coffee.
5
Once the clean light turns off, fill the water reservoir with
water up to, but not exceeding the Clean Cycle Max Fill line
(30 oz.) and run 2 more clean cycles with fresh water to rinse
the internal parts of the brewer.
NOTE: If the Clean light illuminates on the next brew after
a clean cycle, this means there is still calcium build up on
the brewer. Repeat steps above and the clean light will
automatically shut off when it senses your Ninja Coffee Bar is
clean and free of calcium build up!
Please call customer service if any servicing needs to be
performed on the brewer at 1-877-646-5288.
is
™
coffee,
®
OR
Publicidad
Tabla de contenido
