Craftsman 917.28856 Manual Del Operador página 31

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center.
PROBLEM CAUSE "
Loss of drive 1 Freewheel control in
"DISENGAGED" position.
2 Debris on steering plate (if
equipped).
3 Motion drive belt worn. damaged,
or broken.
4 Air trapped in transmission during
shipment or servicing.
5 Axle key missing.
Engine "backfires" 1 Engine throttle control not se
when tuminq between half and full speed (fastl
engine "OFF" position before stopping engine
Engine dies when Reverse operation system (ROS)
tra6tor is shifted is not "ON" while mower or other
into reverse attachment is engaged.
2
3
4
5
CORRECTION
Place freewheel control in
"ENGAGED" position.
See "CLEANING" in the
maintenance section.
Replace motion drive belf.
Purge transmission.
Install axle key at rear wheel. See
"TO REMOVE WHEEL" in the
Service and Adjustments section.
Move throttle control between
half and full speed (fast) position
before stopping eng=ne.
Turn ignition key to RO8 "ON"
position. See Operation section.
NEED MORE HELP.:'
You'll find the answer and more on managemyhome.com - for free! _
• Find this and all your other product: manuals online.
• Get answers from our team of home experts.
, Get a persona[ized maintenance plan for your home.
• Find information and tools to help with home projects. _i
manage home
brought to you by Sears
31