NOCO Genius G15000 Guia Del Usuario página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Contacting NOCO.
Mailing Address:
About G15000.
some of the most innovative and advanced technology
on the market, making each charge simple and easy. It is
quite possibly the safest and most efficient charger you will
ever use. The G15000 is designed for charging all types of
12V lead-acid and 12V lithium-ion batteries, including Wet
(Flooded), Gel, MF (Maintenance-Free), CA (Calcium), EFB
(Enhanced Flooded Battery), AGM (Absorption Glass Mat),
and LIB (Lithium Ion) batteries. It is suitable for charging
battery capacities from 25 to 400 Amp-Hours
and maintaining all battery sizes.
Getting Started.
read the battery manufacturer's specific precautions and
recommended rates of charge for the battery. Make sure
to determine the voltage and chemistry of the battery by
referring to your battery owner's manual prior to charging.
Mounting.
mounting. Mount the charger in a desired location with
#10 self-drill screws. Make sure there are no obstructions
behind the mounting surface. It is important to keep in mind
the distance to the battery. The DC cable length from the
charger, with either the battery clamp or eyelet terminal
connectors, is approximately 75-inches (1,900mm).
Charging Modes.
Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V
COLD/AGM, 12V LITHIUM, 12V AGM+, 13.6V SUPPLY,
and 12V REPAIR, plus JumpCharge for engine starting.
Some charge modes must be pressed and held for three
(3) seconds to enter the mode. These "Press and Hold"
modes are advanced charging modes that require your full
attention before selecting. "Press and Hold" are indicated
on the charger by a red line. It is important to understand
Phone:
1.800.456.6626
Email:
support@no.co
30339 Diamond Parkway, #102
Glenwillow, OH 44139
United States of America
The NOCO Genius
Before using the charger, carefully
The G15000 has four (4) external holes for
The G15000 has nine (9) modes:
G15000 represents
®

Publicidad

Tabla de contenido
loading

Tabla de contenido