Product Setup - D-Link DCS-2310L Guía De Instalación Rápida

PrODUCT SETUP

ZEro CoNfiguratioN SEtuP
If you have a D-Link Cloud Router, you can take advantage of zero configuration setup. this
feature automatically configures your camera's settings for you and adds it to your mydlink account.
If you do not have a d-link cloud Router, you can use the mydlink lite mobile app to install and
configure your camera, as described in the following section.
DCS-2310L
uSiNg tHE iNStaLLatioN wiZarD
If you do not have a D-Link Cloud Router, you can simply use any Windows or mac computer to
go through the Installation Wizard from the cd, which will guide you through the installation process
from connecting your hardware to configuring your camera.
If you do not have a cd-Rom drive, or the cd is missing, please download the setup Wizard from
http://www.mydlink.com/support
DCS-2310L
Step 1:
connect the the ethernet cable already attached to the camera to your d-link
cloud Router.
Step 2:
attach the power adapter already attached to your camera to a wall outlet or
power strip. power is confirmed when the power led is lit.
Step 3:
From any computer, open a web browser, go to http://www.mydlink.com
and log in to your account. click on the device name when the new device
notification appears to add the camera to your router with a wireless
connection.
• Windows Users: Insert the cd. simply click Set up your Cloud
Camera to go through the setup Wizard. If the setup Wizard
program does not automatically start on your computer, go to start
> Run. In the run box type d:\autorun.exe (where d: represents the
drive letter of your cd-Rom drive) and click ok.
• Mac Users: Insert the cd. on the desktop, open your cd drive,
and double-click on the setupWizard file. Wait about 20-30
seconds, and follow the instructions on screen.
3