morse Metal Devil NXT Manual De Seguridad E Instrucciones Sierra página 2

IMPORTANT!
Used according to the directions it will give you excellent service for a number of
metal-cutting applications. Misuse of this tool, however, could result in serious or fatal
injury. Please read these operating and safety instructions carefully and completely.
Read, understand and follow all safety information.
If you are uncertain about any aspect of using this equipment contact your distributor.
MODEL CSM9NXTB/100977 SPECIFICATIONS
MACHINE
Motor:
Cutting Capabilities (Square Tubing) :
Bevel Cut:
Maximum Cutting Thickness:
Maximum Cutting Depth:
RPM No Load Speed:
Recommended Max.Duty Cyle:
Sound Pressure Level: Under Load DB(A) 93.8
Weight:
BLADE DIMENSIONS
Diameter:
Arbor / Bore Diameter:
Avergage Blade Kerf:
STANDARD EQUIPMENT SUPPLIED WITH SAW
1- Side Handle
1- Pair Safety Goggles
1- Carry Case
1- Operating Instructions
WARRANTY REPAIRS:
Contact your local Metal Devil Distributor for
assistance with obtaining warranty repairs.
1
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE!
The Metal Devil saw you have purchased is a well–made tool.
1- Fence Guide
1- Ear Plug Set
1- Blade Wrench
1- Metal Cutting Blade.
120V 60Hz 15 Amp Watts 1800
90˚ cut :1/4" (6mm) wall thickness
45˚ cut :1/4" (6mm) wall thickness
0-45˚
3/8" (9.5mm)
3.25" (82.6mm)
2300 RPM
30 minutes
22 lbs (10 kg's)
9" (229mm)
1˝
.083" (2.1mm)
NOTICE:
Normal wear and tear and damage caused by misuse
is not covered under the 1 year guarantee.
Ear and eye protection must be worn
while operating this equipment.