Failure removal
Failures
Engine not starting or stopping
after a short while
Engine not starting
Engine not running smoothly
No drive or drive slipping
Not a good sweep result
Unsteady running, strong
vibrations
Causes
Too low level of the engine oil
Petrol tank empty
Spark plug dirty from oil or
defective
Wrong gas lever position
Spark plug dirty
Air filter dirty
Clutch slipping
Sweeping roller worn
Components and screwed connec-
tion loosened
Removal
Check the oil level
Add engine oil
Add petrol
Clean or replace the spark plug
Correct the settings
Clean the spark plug
Clean or replace the air filter
Adjust the cable
Consult with the customer service
centre
Replace brushes
Switch the engine off and check /
tighten the screwed connection
Replace any damaged parts
Consult with the customer service
centre
ENGLISH
39