Operating; Before The First Use - Bartscher 125.506 Manual Del Usuario

•
Do not place the device near an open source of flames, electric furnaces, heating
stoves or other sources of high temperature, such as direct sunlight. High
temperature may cause damage to the surface of the device and adversely affect
cooling power and energy consumption.
•
Place the device so that sufficient quantities of air can circulate freely, and thus assure
cooling power.
•
Do not place the device in places with high air humidity or high temperature, since
these factors may damage the device.
•
Place the device so that the plug is easily accessible and that, if necessary, it can
be quickly disconnected from the network.
•
As soon as the device is installed in a suitable place, set the brakes on the swivel
wheels.
Connection
•
Before the first use let the device set for at least 1 hour before it is connected to the
power supply.
•
Connect the device only to a properly installed individual protected socket.
•
The socket's current circuit must be protected by at least 16A. Connect only to a wall
socket; do not use an outlet splitter or multiple sockets.

5.3 Operating

Before the first use

•
Before the first use, wash the device thoroughly (6.2 "Cleaning").
•
Check that the drain tap is closed.
•
Check that the device is turned off.
•
Connect the device to a grounded single outlet.
•
Set the temperature dial to "4".
•
Turn on the device with the ON/OFF switch. The green indicator light turns on.
•
If necessary, turn on the lighting on the glass cover with the switch.
•
Wait about 40 minutes and check if the corresponding temperature has been set in
the device.
•
The device can be filled with the required food products in the appropriate GN
containers only after obtaining the appropriate temperature.
- 32 -