Technical Specifications - STEAMONE M1300 Guía De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22

TECHNICAL SPECIFICATIONS

Voltage
Supply
Water tank
Net weight
Packaging
Your Steam Mop utilizes steam to remove tough grease, dirt and grime. Steam is nature's
purest and most powerful cleaner for safely cleaning all hard floor surface in your home
without harsh chemicals, thus being perfectly ecological Cleans your tile, hardwood,
linoleum and vinyl floors.
1.
Quick & Easy
Eliminates rinsing, wringing, carrying buckets of water and redistributing the dirt on the
floor.
2.
Powerful
Powerful steam dries quickly unlike traditional mopping. Uses powerful steam for
superior cleaning and sanitizing.
3.
No Harsh Chemicals
Use plain tap water or distilled water. Leaves no chemical residue behind.
4.
`Quick Start-Up
Steam is ready in just 35 seconds.
5.
Power "ON" light
The power "On" light will turn blue with the unit is plugged in.
6.
Reusable Micro-fiber towel
Durable triple layer micro-fiber towel loosens lifts and locks in dirt. Just toss in the
.
washing machine when done
230, 50Hz
1300Watts
0, 35 litres
2, 32 kg
33,5L x 165W x 61,5 H (cm)
ADVICE
8
ASSEMBLE YOUR STEAM MOP
1.
Connect Handle to upper, narrower end of Telescopic Pole. To do this, simply slide
Handle onto Telescopic Pole until Release Button,located on Telescopic Pole, snaps
through small hole on Handle (Figure 1).
2.
Insert lower, wider end of Telescopic Pole into Mop Body. (Figure 2). Make sure Release
Button, aligns with the small hole on Mop Body.Press Telescopic Pole until ReleaseMop
Body. Telescopic Pole should now be secured to Mop Body.
NOTE: In order to coax Release Button through hole, it may be necessary to rotate and adjust
Telescopic Pole until buttonaligns properly with hole.
3.
To adjust the height of Telescopic Pole,press and hold Extension Lock downward (Figure
3). While holding Extension Lock down, move Telescopic Pole until it is adjustedto the
desired height. Release Extension Lock, then move Telescopic Pole again until it "clicks"
Securely into place(Figure 4).
4.
To disconnect Telescopic Pole for storage, Press firmly on Release Button while
Simultaneously pulling Telescopic Pole Away from Mop Body
9

Publicidad

Tabla de contenido
loading

Tabla de contenido