Ezviz CS-A1-32W Guia De Inicio Rapido página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Step 3
Adding Detectors
1
Enabling the Adding Detectors Mode
Enable the adding detector mode by quickly pressing the Setting button of the Alarm Hub. The
yellow and red indicators will start to blink. Follow voice prompt.
2
Adding Detectors
Bring the detector close to the Alarm Hub (within 2ft) and then press the detector's alarm button
to start the adding process. A voice prompt stating the type and the serial number of the detector
being added (up to 32 detectors are allowed).
3
Disabling the Adding Detectors Mode
Press the Setting Button again to disable the Adding Detectors Mode after all the detectors are
added.
• The Adding Detectors Mode will be disabled if no operation occurs within 3 minutes.
• The maximum distance between the detectors and the Alarm Hub varies up to 300ft.
......
3

Publicidad

Tabla de contenido
loading

Tabla de contenido