Chauvet Colorado 3 Solo Guía De Referencia Rápida página 4

EN
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead
Mounting
Control Panel Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Menu Map
Main Level
STATIC
ADDRESS
AUTO
PROGRAM
RUN MODE
ZOOM MODE
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product. Make sure the
Mounting Clamp
Safety Cable
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value into the
selected function
Navigates upwards through the menu list or increases the numeric value when in a
function
Navigates downwards through the menu list or decreases the numeric value when in
a function
Programming Levels
RED
GREEN
BLUE
WHITE
ZOOM
STROBE
001-512
AUTO 1-10
PROGRAM 1-10
DMX
SLAVE
ZOOM MODE 1
ZOOM MODE 2
Function
Combines red, green, blue, and white
to make a custom color
(0–100%)
0-255
Changes the beam angle (zoom)
Selects the strobe
frequency (0–25 Hz)
Sets the DMX starting address
Selects automatic programs and auto
SPEED 0-255
program speed
Selects customizable programs
Receives DMX signals from the DMX
controller
Receives DMX signals from the master
Normal operation
Recommended for use Below 40 °F
Floor Mounting
Description
Colorado 3 Solo QRG Rev. 5