Installing The Scanner - König Electronic CMP-FILMSCAN10 Manual De Uso

Introduction
Scan all your 35 mm fi lms and slides with this easy to use USB scanner. Just install
the software on your PC and connect the scanner, put the fi lms or slides in the tray and
insert them in the scanner. The scan time is less then a second per picture. Includes:
software, one fi lm tray, one slide tray and a cleaning brush. Extra trays are available
under CMP-FILMTRAY10 and CMP-SLIDETRAY10.
1 Installation
1.1 Installing the software and driver
Before you can use the fi lm scanner you need to install the driver and ArcSoft
PhotoImpression 6. Please do not connect the USB scanner before you have
installed the driver and software. To install the driver and software, please follow
the instructions below:
• Insert the installation CD into the CD-ROM drive, the installation menu will
automaticly appear.
• When you see the menu, select "Scanner Driver"
• Follow the instructions on the screen
• After fi nishing the driver installation, select "Arcsoft Software Suite" in the menu
of the installation CD
• Select a language and click OK
• Follow the instructions on the screen
• The installed software will automatically create a "PhotoImpression 6" logo on
your desktop. Restart your computer and remove the installation CD from your CD-
ROM drive.

1.2 Installing the scanner

• After the driver and software are installed, connect the scanner via a USB 2.0 port.
Don't insert a tray yet
• Windows will start the "found new hardware wizard". Follow the instructions shown
on the screen.
• After completing the wizard the USB fi lm scanner is ready to use
2 Using the trays
1. Open the slide holder as illustrated
ENGLISH
2