König Electronic CMP-FILMSCAN10 Manual De Uso página 4

The picture will be visible in the preview area. A maximum of 12 can be stored in the
preview area. If you want to save the scanned pictures, press the Transfer button to
save them. The preview area will be automatically cleared then.
If you would like to see the scanned pictures, do not minimize the window, but click on
Exit and you will see the pictures you scanned before
4 Cleaning the dust from the scanner
Open the PhotoImpression 6 software as if you were about to scan a picture. Do not
insert any slides or negatives into the fi lm scanner. You will be able to see the dust
that is on the lens. Use the cleaning brush to wipe the dust.
5 Editing pictures
To edit a picture, select one picture and go to Edit. Select Photo editing tools, a new
window will open.
The three tabs in the upper left corner contain several editing options.
Insert a tray into the scanner and move
the tray carefully to adjust the fi lm. To
capture a picture, click on the Snap Shot
in the window or press the copy button
on the scanner.
Note: to ensure the best image quality,
please allow about 5 seconds between
snapshots and transfers for white balance
enhancement. The colour and brightness
can also be adjusted manually by
adjusting the settings under the Colour/
Brightness button.
4