Kenmore 796.4130 Manual De Uso Y Cuidado página 15

CYCLE GUIDE (continued)
The cycle guide below shows the default settings, available options and recommended fabric types
for each cycle. Allowable modifier adjustments are shown below the default setting for each cycle.
Fabric or
Cycle
Load Type
Express Lightly soiled clothing
Wash and small loads.
Small loads of cotton,
Cold linen, towels, shirts,
Clean sheets, jeans, mixed
loads.
Dress shirts, blouses,
Delicates nylons, sheer or lacy
garments.
Rinse & Loads that only need
Spin to be rinsed.
NOTE:
y To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every cycle.
A chime will sound and the LED will not light if the selection is not allowed.
The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and
y
other operating conditions.
y These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may
sound different at different stages of the wash cycle. This is normal.
y When the Accela Wash option is selected, the drum spins to rinse the clothes. To use the No Spin option, you must
deselect the Accela Wash option.
Load Wash Wash
Sensing Option Temp.
Hot
Warm
No Yes
Cold
Tap Cold
Cold
Yes Yes
Tap Cold
Cold
No Yes
Warm
Tap Cold
Cold
No No
Spin Soil Accela
Speed Level Wash
Extra High Light
High
Medium Heavy
Low Normal
No Spin
High Normal
Extra High
Medium
Light
Low
No Spin
Medium Normal
Low Heavy
No Spin Light
High N/A
Extra High
Medium
Low
No Spin
15
= Available Option
= Default Setting
Steam Pre Extra Delay
Treat Wash Rinse Start
HOW TO USE
Stay Auto Energy
Fresh Soak Saver