How To Use; Control Panel Features - Kenmore 796.4130 Manual De Uso Y Cuidado

WARNING:
entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

CONTROL PANEL FEATURES

A POWER (ON/OFF) BUTTON
Press to turn the washer ON or OFF.
NOTE: Pressing the POWER button during a
cycle will cancel that cycle and any load
settings will be lost. The door will unlock after a
brief pause, unless the water level or
temperature is too high.
B CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will appear in the display. These settings
can be adjusted using the cycle setting buttons
any time before starting the cycle.
C START/PAUSE BUTTON
Press this button to start the selected cycle.
If the washer is running, use this button to pause
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within four minutes of selecting a cycle,
the washer automatically turns OFF.
NOTE: To protect your clothing, not all settings are available on all cycle selections.
To reduce the risk of fire, electric shock, or injury to persons, read and follow this

HOW TO USE

D CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the
selected cycle. The settings light up above the
buttons to show the current selection.
E SPECIAL CYCLE AND OPTION BUTTONS
These buttons are used to activate special cycles
or options.
TIME AND STATUS DISPLAY
F
The display shows the cycle status, door lock
status and estimated time remaining.
STEAM TREAT BUTTON
G
Select the STEAM TREAT button to add steam to
the selected cycle for added cleaning power.
NOTE: The steam option is not available on all
cycles.
12
G