Dyna-Glo DGPH201BR El Manual Del Propietario página 7

ASSEMBLY INSTRUCTIONS
4. Load Cylinder Housing (D) onto Post (E).
Slide Cylinder housing (D) down.
5. Unscrew ignitor knob (marked with lighting bolt) from the
control panel on the head assembly (C). Insert AAA
battery (MM) with positive end (+) outward. Replace ignitor
knob.
Hardware Used
MM
battery
AAA
The electronic ignition requires 1 "AAA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargable (Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.
x 1
WARNING
7
4
E
5
C
MM
D