English - XD P330.88 Serie Manual De Instrucciones

ENGLISH

Congratulations with your activity tracker! All activities are displayed on the app after synchronizing with the data
from the activity tracker. Please read this manual carefully before use.
Please note: the screenshots below differs from versions of the app due updates of the new versions.
Device activate & charger
1. Charge the watch for at least 1.5 hours before using it.
2. Make sure that the activity tracker is charged in order to work properly. Once the device has a low battery status,
charge the device by detaching the screen from the strap to reveal the USB on the side of the device. Connect the
USB on the device to a normal DC port (5V-1000 mA) for charging.
Pair the device
Before connecting with the "LinkSelf" app, please make sure the BT connection of your smartphone device has been
enabled. To use the activity tracker, make sure your smartphone is connected to the internet via Wi-Fi/4G/3G.
1. Apple iPhone (IOS 8.0 and up), please search "LinkSelf" in the App store to download/ install it.
2. Android phone (4.4 and up), please search "LinkSelf" in Google Play to download and install it.
Download the app by either scanning the QR code or search for "LinkSelf" and download in the Apple Store
or Google Play store.
Compatible with below versions:
Apple Store:
Google Play store:
Support Bluetooth 4.0
IOS 8.1 & above
Android 4.4 and above (most common models)
4