Installation; Valve Positioning - Hayward SelectaFlo Hi-Efficiency SP0425 El Manual Del Propietario

Installation

The SP0425 SelectaFlo
Using the union connections built into the SelectaFlo
Figure 1, union nuts to be hand tightened ONLY. The PUMP, RETURN, and WASTE ports are 2" socket x
2 ½" spigot (solvent weld) connections. For 2 ½" piping, a standard 2 ½" x 2 ½" coupling is required.
The supplied elbow can be used on the WASTE port to direct waste piping away from the equipment
pad. Proper Solvent Cementing practices as outlined in ASTM D2855 and ASTM F493 should be
followed.
For simple and efficient plumbing from TriStar
EFC3220SF union fitting from the PUMP outlet to the PUMP port on valve as shown in Figure 2.
Figure 1
Union Connection between filter and valve
Function of Valve Positions
VALVE SETTING
PUMP – THROUGH FILTER – RETURN
FILTER
For normal filtration and vacuuming pool through filter.
PUMP – THROUGH FILTER – WASTE
BACKWASH
For cleaning filter.
PUMP – THROUGH VALVE ONLY – WASTE
WASTE
For vacuuming directly to waste, lowering pool level and/or draining pool.
PUMP – THROUGH VALVE – RETURN
RECIRCULATE
For bypassing filter, but circulating pool water.
Hi-Efficiency valve is designed for Hayward ProGrid
TM
FLOW DIRECTION THROUGH VALVE
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
TM valve, attach the valve to the filter as shown in
® or EcoStar ® series pumps, use the included EcoFlo
EcoFlo union fitting from pump to valve
ALWAYS TURN OFF PUMP
BEFORE CHANGING VALVE POSITION
and DEP500 series filters.
®
Figure 2
4