OPERATION
aIR VENTS
Never cover air vents. Keep them free of obstructions and debris. They must always remain clear
for proper motor cooling.
OPERaTING THE BLOWER(SEE FIGURE 7)
Hold the blower firmly. Sweep from side to side with the nozzle several inches above the ground
or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of you. Most dry
blowing operations are better suited to low speeds, rather than high speeds. High speed blowing is
a better way to move heavier items like large debris or gravel.
W a R N I N G
•
To avoid serious personal injury, do not wear loose-clothing or articles such as scarves,
strings, chains, ties, etc., that could be drawn into the air vents. Tie back long hair to make
sure it does not get drawn into the air vents.
•
To avoid serious personal injury, ensure the unit is in OFF position and unplugged before
clearing the impeller.
•
To avoid serious personal injury, always wear gloves to protect yourself from the impeller
blades or other sharp objects.
Fig.11
18