Samsung WE357 Serie Manual De Usuario página 39

tE
A temperature sensor problem.
Restart the cycle. If the code reappears, call customer service.
A motor problem.
8E
Restart the cycle. If the code reappears, call customer service.
High/Low voltage detected.
2E
Restart the cycle. If the code reappears, call customer service.
A Communication error between the SUB(Senso0 PBA and the MAIN PBA
AE
Call customer service.
A MEMS sensor problem.
8E
Call customer service.
SF1
A system error
SF2
Call customer service.
SF3
Too many suds are detected during the wash session. The unit is put on hold until
SUdS the amount of suds have been reduced. The unit will then go back to operating.
When it finishes washing, the "End" and "SUDS" codes will blink in turn.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
troubleshooting 39
WF435A 03159B 06 ENindd 39 2014 3 3 1(/:24:33