Accessory Installation - WEG EIO1 Guía De Instalación, Configuración Y Operación

Digital Input and Output Expansion Module - EIO1

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the servo drive control module.
2. Remove the slot protective cover, as shown in figure 4.1.
Figure 4.1: Remove the protective cover
3. Connect the accessory to the appropriate slot, as illustrated in figure 4.2. Remember that the
accessory EIO1 can be connected to any available slots on the SCA06.
Figure 4.2: Accessory installation
8 SCA06