Package Content; Accessory Installation - WEG EAN2 Guía De Instalación, Configuración Y Operación

Analog Outputs Expansion Module - EAN2

3 PACKAGE CONTENT

Accessory module in anti-static package.
„
Installation, configuration and operation guide.
„

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the servo drive control module.
2. Remove the slot protective cover, as shown in
3. Connect the accessory to the appropriate slot, as illustrated in
8 | SCA06
Figure 4.1 on page
Figure 4.1: Remove the protective cover
Figure 4.2: Accessory installation
8.
Figure 4.2 on page 8.