Make sure that you read and understand this manual completely before using this system. This manual shall be available for
everyone assembling, disassembling or loading the Power Dynamic Spider Deck750.
For health and safety reasons people assembling, disassembling, transporting and maintaining the stage deck should wear
adequate Personal Protection Equipment like, gloves, hard heads and safety shoes. Elements weighting 20 kg or more shall be
carried by at least 2 persons.
SCOPE
Spider Deck750 is modular framework with different types of topping to be used as raised platform for purposes of displaying,
performances etc
LIMITATIONS OF USE
Due to its natural action, the plywood may shrink and expand depending on its humidity and the ambient temperature. It should
be used at a humidity level between 22% and 42% and a temperature between 18 and 26°C.
ASSEMBLY INSTRUCTIONS
Tools required:
•
Allen key size 8
•
Spirit level
NOTE: Please check all connections such as deck to deck clamp, leg to leg clamp and the overall stability of the system before
loading.
RISER ASSEMBLY
1.
Extend the Spider risers to about 80% of their maximum width.
2.
Place the stage deck upon the Spider risers.
3.
Completely extend the risers until they click into place.
4.
Check whether all the elements are fitted properly.
ATTENTION! Please make sure that the complete unit is stable and well assembled before using it.
DECK TO DECK CLAMP
1.
In order to connect two stage decks, slightly pull them out of each other to create adequate space for inserting the
Spider Stage clamp.
2.
Loosen the Allen screw to make the Spider Deck to Deck clamp more flexible.
3.
Slide the Spider Deck to Deck partially into the slot, to connect both stage decks.
4.
Once you have succeeded, insert the Spider Deck to Deck completely into the slot.
5.
Tighten the Allen screw.
6.
In this way, the stage decks are fitted to each other not only on the outside but also on the inside of the installation,
which adds to the overall stability.
ENGLISH