Care And Cle Aning - Black+Decker PERFORMANCE FP6000 Manual De Instrucciones

flour mixture to prevent over chopping. Process nuts and fruits using short
pulses to blend with other ingredients.
• When using the slicing, shredding or dicing disk, do not let the food
accumulate too high (over 2/3 full); stop and empty the workbowl.
• Do not use the processor to:
- Grind coffee beans, bones, grains or hard spices
- Liquefy fruits and vegetables
- Slice or chop warm meat
CA RE A N D C LEA N I NG
This product contains no user serviceable parts. Refer service to qualified
service professional.
Important: Always unplug your processor from the outlet before cleaning.
CL EA NI N G
Important: blades are sharp. Handle blades and disks
carefully.
• Completely disassemble processor parts before
washing.
• Rinse parts immediately after processing for easier
cleaning.
• Wipe base and feet with a damp cloth and dry
thoroughly. Stubborn spots can be removed by
rubbing with a damp cloth and a mild, nonabrasive
cleaner. Do not immerse base in liquid.
• All removable parts can be washed by hand. The removable parts, except
for the dicing shaft, can be washed in the dishwasher, top rack only (V).
Hand-washing of plastic parts will help to maintain the food processor's
appearance.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons
of baking soda and 1 tablespoon of water. Apply to stains and let stand
overnight. Rinse and dry.
• Do not use rough scouring pads or cleansers on any plastic or metal parts
to clean.
• Do not allow blades or disks to soak in water for long periods of time.
• Remember to clean the internal shaft of the chopping blade. Use a brush
to remove any residual food particles.
• If you are having trouble closing the lid over the workbowl, apply a small
amount of vegetable oil to the rim of the cover and workbowl. This should
make the pieces work smoother when attaching the cover to the bowl.
CL EA NI N G TIP S :
• For quick clean up, combine 1 cup warm water and a drop of liquid dish
soap in the food processor workbowl.
• Cover and process on medium speed for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important: do not place the processor parts in boiling liquids.
16
V