Tabla de contenido
Publicidad
STEP 3 - PREP THE MIRROR
1. Find and place the thicker foam rectangle from the packaging on a flat surface. Place the mirror, face down, on the foam. Clean the
bottom section of the mirror tubing with isopropyl alcohol. Peel and stick the hook and loop adhesive strip to the mirror tubing.
1
(2) 1" Loop
Adhesive Strip
(2) 5" Loop
Adhesive Strip
Top of Mirror
Mounting slots
Mirror tubing
Thicker rectangular foam
from packaging
TITLE 24 - ADDING THE REFLECTOR
1. Add the included reflector* to the back of the mirror as shown.
* Title 24 models only
Part no. 209-1308-rC rev. 08/29/19
Sculpt
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
8
Installation instructions
Publicidad
Tabla de contenido
