Unit Description - Salvador Escoda MUCSW-16-HG Manual De Instalación Y Funcionamiento

PANEL ASSEMBLY with attractive and elegant design
by ABS material.
AIR DELIVERY LOUVER
The internal surface is treated by electrostatic fiber and
with wave shape, efficiently preventing the condensate
water blowing into the room.
AIR FILTER installed with the air return grille is
moveable and washable.
AIR VENTURI is equipped with a protective grille that
impedes access to the moving fan.
UNIT BODY CASING is made of galvanized steel and
both internal and external surface are thermal acoustic
insulated preventing the condensate water and ensuring
the silent operation.
EXTERNAL FRESH AIR
There is one pre-stamped hole on unit body for
introducing outside fresh air going through conditioning
coils.
DELIVERY TREATED
ROOM: There are pre-stamped holes on unit body for
delivery of treated air to the adjacent room.

UNIT DESCRIPTION

AIR TO ADJACENT
WATER COIL manufactured with 3/8" copper
tubing mechanically
hydrophilic aluminum fins. Coils shall be factory
tested by dried air to 30 bars.
The coil connections are provided with air bleed
vent and partial water drain vent.
The coil connections are attached with connection
supporter.
CONDENSATE DRAIN DEVICE
The unit is equipped with a high density polystyrene
foam as main condensate drain pan, a float switch, a
no return valve and a pump with 70cm max. head.
EXTERNAL AUXILIARY DRAINE PAN
For collecting condensate from the valve piping and
transporting it to the main condensate drain pan.
FAN BLOWER & FAN MOTOR
The balanced centrifugal fan blower and fan motor
can be accessed through the window of air return
grille, easily for service.
THE 3-SPEED MOTOR (STANDARD)
The unit is standard equipped with 3 speeds motor.
CONTROL BOX
The control box is attached external of the unit body.
4
bonded to corrugated